Description of Preform and cap 90T 130T 180tons injection blow molding machine
Features of of BL-1800 Preform and BL-1400 cap injection molding machine:
High precision
BL-1800 injection molding machine adopts full digital closed-loop control, with high precision, pressure can be accurate to 0.3bar, and flow is stable, especially when the flow is low, the advantages are more obvious. It adopts permanent magnet synchronous servo motor and special servo drive, with fast response speed, the response time is only 60m at 0-maximum flow, and about 100m at 0-maximum pressure.
Low oil temperature
The BL-1800 injection molding machine has no magnetic flow loss, so the oil temperature is the lowest compared to limited pump or variable pump memory. Furthermore, the use time of the hydraulic oil is fully extended, the wear of various seals is reduced, and the amount of cooling water is saved at the same time.
Low noise and long life
The internal gear pump imported from Germany is precise and stable. It has the advantages of small internal leakage, long service life and low working noise. Compared with ordinary fixed pump models, the noise is reduced by 20 decibels on average.
BL-1800 Servicing Energy-saving Adjustable Hydraulic Volume Injection Molding Machine
This machine adopts energy-saving devices such as motors with excellent performance; sensitive servo control system, quick start-up reaction time only needs 0.04S; servo motor and hydraulic system form a closed-loop control, which greatly improves the molding repeat accuracy compared with traditional injection molding machines; reduces power usage , Under ideal working conditions, this model can save electricity by 25%~80% compared with traditional injection molding machines; the noise of the whole machine is lower when it is running, which is significantly lower than that of traditional injection molding machines.
1. Electronic control system
1. It is equipped with advanced professional computer controller for injection molding machine, and the whole machine control system adopts full digital control, which has good controllability and high reliability;
2. Optimize the superposition and switching methods of the system power combination to maximize energy saving and improve response speed;
3. The software function is more powerful, and the injection molding machine has good scalability. It can provide expansion support such as gas-assisted and manipulator.
4. Built-in multiple sets of mold forming process parameter access system, which is convenient for the factory to manage the molds, can realize the rapid transfer of mold parameters, and the production preparation is high-speed and efficient.
2. Mold clamping system
1. The inwardly rolled five-point elbow elbow clamping mechanism can provide a strong clamping force in a short time
2. Increased internal spacing of tie rods and mold shifting stroke allow larger and deeper molds
3. Hydraulic motor drives automatic gear adjustment
4. Adjustable movable formwork support structure to reduce the load-bearing deformation of the tie rod
Equipment list of BL-1800 Preform and BL-1400 cap injection molding machine:
| Items | Description | Model | Size-mm | Qty. |
| Part1: PCO1881 Preforms injection molding machine |
| 1.1.1 | Injection molding machine | BL-1800 | 4800*1450*1850 | 1set |
| 1.1.2 | 15g PET preform mold(12 cavities, 1500pcs per hour) | 1pcs |
| 1.1.3 | 32g PET preform mold(12 cavities, 1500pcs per hour) | 1pcs |
| 1.2 | Dryer | 100KG | 1030*695*1120 | 1set |
| 1.3 | Water Chiller | 10P | 1150*800*1150 | 1set |
| 1.4 | Plastic materials feeder | 300G | 450*380*600 | 1set |
| 1.5 | Colour mixing machine | 100KG | 1020*980*1360 | 1set |
| Part2: Matching Caps injection molding machine: |
| 2.1.1 | Injection molding machine | BL-1400 | 4500*1100*1700 | 1set |
| 2.1.2 | 2.5g PP caps mold(12 cavities, 1500pcs per hour) | 1pcs |
| 2.2 | Dryer | 100KG | 1030*695*1120 | 1set |
| 2.3 | Water Chiller | 10P | 1150*800*1150 | 1set |
| 2.4 | Plastic materials feeder | 300G | 450*380*600 | 1set |
| 2.5 | Colour mixing machine | 100KG | 1020*980*1360 | 1set |
| Part3: Share auxiliary device both for two injection plants: |
| 3.1 | Plastic Crusher | 400 Model | 980*840*1300 | 1set |
Parameters for BL-1800 preform Injection molding machine
| Specification | unit | BL-1800 |
| Injection unit | Screw diameter | mm | 45 | 48 | 50 |
| Screw l/D Ratio | L/D | 23.3 | 21 | 19.1 |
| Shot size(theoretical) | cm3 | 373 | 426 | 451 |
| Injection weight | g | 336 | 383 | 406 |
| Injection rate | g/s | 138 | 159 | 180 |
| Injection pressure | Mpa | 196 | 172 | 158 |
| Screw speed | rpm | 0-200 |
| Clamping unit | Clamping force | KN | 1800 |
| Toggle stroke | mm | 430 |
| Space between Tie -Bars | mm | 460×460 |
| Mould height | mm | 180-500 |
| Ejector stroke | mm | 135 |
| Ejector tonnage | KN | 40 |
| Others | Max pump pressure | Mpa | 16 |
| Pump motor power | kw | 15 |
| Heating power | kw | 8.9 |
| Machine dimensions | m | 4.8×1.45×1.85 |
| Machine weight | t | 5.1 |
Parameters for BL-1400 cap Injection molding machine:
| Specification | unit | BL-1400 |
| Injection unit | Screw diameter | mm | 40 | 42 | 45 |
| Screw l/D Ratio | L/D | 22 | 20 | 18.6 |
| Shot size(theoretical) | cm3 | 232 | 257 | 287 |
| Injection weight | g | 209 | 231 | 258 |
| Injection rate | g/s | 91 | 110 | 128 |
| Injection pressure | Mpa | 202 | 183 | 159 |
| Screw speed | rpm | 0-200 |
| Clamping unit | Clamping force | KN | 1400 |
| Toggle stroke | mm | 380 |
| Space between Tie -Bars | mm | 420×420 |
| Mould height | mm | 170-430 |
| Ejector stroke | mm | 120 |
| Ejector tonnage | KN | 33 |
| Others | Max pump pressure | Mpa | 16 |
| Pump motor power | kw | 13 |
| Heating power | kw | 7.7 |
| Machine dimensions | m | 4.5×1.1×1.7 |
| Machine weight | t | 4.1 |
Plastic Crusher:
Hopper Dryer:
Product Tags:
|
|
Preform And Cap 90T 130T 180tons Injection Blow Molding Machine Images
|
